Paver Cleaning & Restoration Services

Professional Paver Cleaning & Restoration in Southwest Florida

Elite Pavers Solutions professionally cleans and restores pavers across Southwest Florida, removing algae, stains, efflorescence, and years of buildup from driveways, pool decks, and patios in Cape Coral, Fort Myers, and Naples. Most cleaning jobs are completed in half a day, with costs ranging from $0.30 to $0.80 per square foot. Call for a free assessment.

LICENSED & INSURED
5.0 STARS (40+ REVIEWS)
Workmanship Warranty

Florida's humidity, heat, and heavy rainfall cycle does not just wear down pavers -- it grows things on them. Black algae, mold, mildew, and efflorescence are not cosmetic problems. Left untreated, they break down surface integrity, discolor permanently, and make pool decks and walkways dangerously slippery. Elite Pavers Solutions provides professional paver cleaning and restoration throughout Southwest Florida, using surface-specific methods that clean effectively without damaging your investment. Whether your driveway has not been touched in years or your pool deck turned green after last hurricane season, we restore it.

Common Paver Problems We Clean and Restore

Southwest Florida's climate creates a predictable set of paver problems. Here is what we regularly treat across Cape Coral, Fort Myers, Naples, and surrounding areas:

Problem
Common Cause
Our Treatment
Black algae / green algae
Florida humidity + shade + moisture retention
Biodegradable algaecide + controlled pressure or soft wash
Efflorescence (white haze)
Salt migration from concrete curing process
pH-balanced efflorescence remover + surface rinse
Oil and grease stains
Vehicle drips on driveway pavers
Degreaser treatment + hot water extraction
Rust stains
Metal furniture, irrigation water, or fertilizer
Oxalic acid-based rust remover + neutralize and rinse
Mold and mildew
Wet shaded areas, screened enclosures
Anti-fungal treatment + pressure wash + seal recommendation
General dirt and discoloration
Traffic, weather, age
Standard pressure wash with appropriate cleaning solution
Faded color / dull appearance
UV exposure over time
Color enhancement sealer applied after cleaning

Cleaning Method: Pressure Washing vs. Soft Washing

One of the most common mistakes homeowners make when cleaning pavers themselves is using the wrong pressure for their paver type. High-pressure washing that works fine on concrete pavers can permanently damage travertine, porcelain, and natural stone. We match the method to the material.

Paver Type
Recommended Method
Why
Concrete pavers
Pressure washing with surface cleaner
Dense material handles pressure without damage
Brick pavers
Pressure washing (controlled)
Durable, but high pressure on edges can chip
Travertine
Soft washing only
Porous natural stone -- high pressure etches and pits surface
Porcelain pavers
Pressure washing (moderate)
Non-porous, handles water well but avoid edge pressure
Tumbled concrete
Pressure washing (low-moderate)
Textured surface needs agitation, not just rinse pressure

In our years of cleaning paver surfaces across Lee and Collier counties, we have repaired cleaning damage caused by homeowners or inexperienced contractors using the wrong technique on travertine pool decks. The restoration cost from that damage often exceeds the original cleaning job. Using the right method the first time protects your investment.

HOW WE WORK

Our Paver Cleaning Process

We do not show up with a pressure washer and call it done. Professional paver cleaning is a sequenced process that addresses the surface, the joints, and the underlying cause of the buildup.

01

Free on-site assessment

we identify paver type, problem type, and the right treatment approach before touching anything

02

Pre-treatment

algaecides, degreasers, or efflorescence removers applied and allowed to penetrate (dwell time matters)

03

Cleaning

pressure washing or soft washing using the appropriate pressure and equipment for your paver material

04

Joint inspection

we check polymeric sand condition and refill any eroded joints before sealing

05

Post-clean rinse and surface neutralization

prevents cleaning agent residue from interfering with sealer adhesion

06

Sealing recommendation

we advise whether sealing immediately or after a cure period is right for your surface

07

Final walkthrough and before/after photo documentation

Can We Restore Faded Pavers Without Replacement?

In most cases, yes. Homeowners who see faded, dull, or discolored pavers often assume replacement is the only fix. It rarely is. Here is the honest assessment:

Surface fading from UV exposure

color enhancement sealers applied after cleaning restore significant vibrancy on concrete and brick pavers

Algae and mold staining

professional cleaning removes it entirely in the vast majority of cases, restoring original color

Efflorescence

almost always fully removable with the right chemical treatment -- no replacement needed

Oil and grease stains

removable in most cases with degreaser treatment; deep penetrating stains on older unsealed pavers are the exception

Physical damage (cracked, chipped, or broken pavers)

cleaning and sealing will not fix structural damage -- we will advise you honestly if repair or replacement is needed for specific pavers alongside the cleaning job

Our standard is simple: if cleaning and restoration can solve the problem, we will not recommend replacement. If specific pavers genuinely need to be replaced, we will tell you exactly which ones and why, and we can coordinate repair work through our paver repair service.

Paver Cleaning Cost in Southwest Florida

Professional paver cleaning in the Cape Coral and Fort Myers area typically costs $0.30 to $0.80 per square foot. Below is a general pricing guide to help you plan:

Surface / Project Type
Typical Size
Estimated Cost Range
Patio or pool deck
300 to 600 sq ft
$150 to $480
Driveway (standard two-car)
400 to 700 sq ft
$200 to $560
Driveway + patio combined
700 to 1,200 sq ft
$350 to $960
Heavily stained or algae-covered surface
Any size
Add $50 to $150 for pre-treatment
Bundle: clean + seal same visit
Any size
Cleaning cost + sealing rate (bundled discount available)

These ranges cover standard residential cleaning. Commercial projects, heavily contaminated surfaces, or projects requiring significant joint repair may fall outside this range. We provide a written, itemized estimate after every free on-site assessment.

FAQ

Frequently Asked Questions

How do professionals clean pavers?

Professional paver cleaning uses a combination of the right pressure levels, surface-specific cleaning solutions, and proper technique for each material. Concrete and brick pavers are typically pressure washed using a rotating surface cleaner with appropriate detergents. Travertine and natural stone require soft washing -- low-pressure application of stone-safe cleaning formulas that clean effectively without damaging the porous surface. A professional finishes by inspecting joint sand condition and recommending sealing.

Can you pressure wash travertine pavers?

Not with standard high-pressure equipment. Travertine is porous and can be permanently etched, pitted, or damaged by high-pressure washing. We use soft washing for all travertine and natural stone surfaces -- low pressure with appropriate cleaning solutions that lift dirt, algae, and stains without harming the stone.

How do you remove black algae from pavers in Florida?

We apply a biodegradable algaecide, allow it to penetrate and kill the organism at the root level, then use the appropriate washing method for your paver type to remove it. Sealing immediately after is strongly recommended -- in Florida's climate, algae recolonizes quickly on unprotected surfaces.

How much does paver cleaning cost in Cape Coral or Fort Myers?

Professional cleaning typically runs $0.30 to $0.80 per square foot in Southwest Florida. A standard pool deck or patio (300 to 600 sq ft) runs $150 to $480. We provide a free on-site assessment and written estimate before any work begins.

Can stained pavers be restored without replacing them?

In most cases, yes. Algae, efflorescence, surface oil stains, and UV fading are all addressable without replacement. We provide an honest assessment at every job -- if specific pavers genuinely need replacing, we will tell you which ones and why rather than recommending full removal unnecessarily.

Why Clean Now Instead of Waiting?

In Florida's climate, what starts as surface algae becomes a structural problem faster than homeowners expect. Algae and mold hold moisture against the paver surface, accelerating joint erosion. Black algae in particular has root systems that penetrate and break down grout and polymeric sand joints over time. A cleaning job that costs $200 to $400 today prevents base erosion that can cost $1,000 to $2,500 to repair in two years.

Cleaning also preserves the effectiveness of any sealing investment. A sealer applied over algae or efflorescence traps the problem underneath and fails faster. Cleaning first is the correct sequence -- and we offer both services, often in the same visit.

Why Choose Elite Pavers Solutions for Cleaning?

We are a Southwest Florida paver company, not a general pressure washing service. The difference matters: we know what each paver type requires, we use the right equipment and products for travertine versus concrete versus porcelain, and we identify joint sand erosion and other underlying issues that a standard cleaning crew would miss. Every cleaning job is an opportunity to catch small problems before they become expensive ones.

GET STARTED

Get Your Free Paver Cleaning Assessment

Serving Cape Coral, Fort Myers, Bonita Springs, Estero, Naples, Marco Island, Port Charlotte, Punta Gorda, and North Port. Call us today or fill out the form below to schedule your free on-site cleaning assessment. We respond within 24 hours.

Prefer to talk? Call us a (239) 238-6821